Ecobee SMART THERMOSTAT Installation Manual

Other manuals for SMART THERMOSTAT: User Manual, User Manual, User Manual, Installation Manual

Summary of SMART THERMOSTAT

  • Page 1

    ©2009 ecobee 333 adelaide street west / 6th floor toronto / ontario / m5v 1r5 / canada toll free 1.877.932.6233 www.Ecobee.Com ma-106-0003-r3 printed in canada smart thermostat installation manual.

  • Page 2

    Welcome thank you for supporting ecobee, the smart thermostat that provides your customers with freedom and flexibility in managing their home environment. The ecobee smart thermostat has been designed in partnership with hvac contractors to ensure that the installation process is simple and efficie...

  • Page 3

    Before you begin this product is intended to be installed by trained, service profes- sionals in all indoor residential environments. This manual explains the procedures for installing the ecobee smart thermostat. Please read it carefully before beginning the installation. For information on how to ...

  • Page 4

    Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: reorient or relocate the receiving antenna increase the separation between the equipment and receiver connect the equipment into an outlet ...

  • Page 5

    Insert a screwdriver into one of the two slots and twist gently 7 4. Move the back of the enclosure out of the way and make the holes where indicated in step 3. The mounting holes can accommodate a #6 pan-head screw. 5. Use drywall plugs or other screw anchors (not included) to ensure the equipment ...

  • Page 6

    Wiring diagrams below is the equipment interface terminal labels conventional system with up to three-stage heating and two-stage cooling d- d+ gnd +12v in2- in2+ in1- in1+ y w o/b g w2 aux r/h r/c nc nc acc1 acc1r acc2 acc2r acc3 acc3r power system line communications 24 vac multi-stage heating & c...

  • Page 7

    Powered or non-powered accessories ventilator (heat recovery or energy recovery) powered & non-powered accessories acc accr humidifier or dehumidifier line in or acc accr humidifier or dehumidifier line in or ventilator heat recovery acc accr dehumidify or max input ventilator line in 11 installing ...

  • Page 8

    4. Move the backplate out of the way and make holes where indicated in step 3. The mounting holes can accommodate a #6 pan-head screw. 5. Use drywall plugs or other screw anchors (not included) to ensure that the smart thermostat can be mounted securely to the wall. 6. Fasten the backplate to the wa...

  • Page 9

    Communications this led monitors the communications between the smart thermostat and the equipment interface (i.E., the d+ and d- terminals). Led on the equipment interface and smart thermostat are not communicating to each other. Led off the two devices are communicating properly. Navigating the sm...

  • Page 10

    Configuring the installer settings installer settings let you configure the settings related to the various devices (such as a furnace, air conditioner, humidifier, dehumidifier, or ventilator) that are connected to the equipment interface. To prevent accidental modifications to these settings you c...

  • Page 11

    Heat/cool min delta the minimum difference between the heat mode set temperature and the cool mode set temperature when the system mode is in auto change over. Compressor min time minimum amount of time the compressor will remain off between calls for heat/cool. Compressor min temp the minimum outsi...

  • Page 12

    Are connected to the internet, your contact information, including your company logo, will be automatically loaded onto the thermostat. Reset installation settings selecting this option will restore all the installation set- tings back to the factory default. Any user setting (not re- lated to the e...

  • Page 13

    23 auxiliary heat run time alert (optional) in a heat pump, with auxiliary heat configuration, you can program the smart thermostat to generate an alert if the auxiliary heat runs for more than this programmed amount of time during a 24 hour period. Auxiliary outdoor temperature alert (optional) in ...

  • Page 14

    3-year limited warranty ecobee warrants that for a period of three (3) years from the date of purchase by the consumer (“customer”), the ecobee smart thermostat (excluding battery) (the “product”) shall be free of defects in materials and workmanship under normal use and service. During the warranty...