- DL manuals
- Ecobee
- Thermostat
- SMART THERMOSTAT
- Installation Manual
Ecobee SMART THERMOSTAT Installation Manual
Summary of SMART THERMOSTAT
Page 2
Getting started 2 welcome 2 hvac system compatibility information 4 specifications 5 installing the ecobee smart thermostat 7 wiring diagrams 9 equipment interface status led 18 navigating the smart thermostat 19 configuring the installer settings 20 configuring the reminder alerts 27 performing a h...
Page 3
Getting started welcome thank you for supporting ecobee, the smart thermostat that provides your customers with freedom and flexibility in managing their home environment. The ecobee smart thermostat has been designed in partnership with hvac contractors to ensure the installation process is simple ...
Page 4
Before you begin this product is intended to be installed by service professionals trained in all indoor residential environments. This manual explains the procedures for installing the ecobee smart thermostat. Please read it carefully before beginning the installation. For information on how to ope...
Page 5
Reorient or relocate the receiving antenna increase the separation between the equipment and receiver connect the equipment to an outlet on a different circuit from the receiver consult the dealer or an experienced radio/tv contractor for help. Warning: changes or modifications not expressly approve...
Page 6
©2010 ecobee 333 adelaide street west
Page 7
Wiring diagrams below are the equipment interface terminal labels please take note that there is a factory installed jumper between r/h and r/c. 9 installing the smart thermostat installing the smart thermostat 10 d- d+ gnd +12v in2- in2+ in1- in1+ y w o/b g w2 aux r/h r/c nc nc acc1 acc1r acc2 acc2...
Page 10
4. Move the backplate out of the way and make holes where indicated in step 3. The mounting holes can accommodate a #6 pan-head screw. 5. Use drywall plugs or other screw anchors (not included) to ensure the smart thermostat can be mounted securely to the wall. 6. Fasten the backplate to the wall us...
Page 11
3. Attach the front cover of the smart thermostat to the backplate. Ensure the four pins on the circuit board mate with the terminal block on the backplate as shown below. Connecting power once you’ve completed the wiring of the smart thermostat and equipment interface, you can apply power to the eq...
Page 12
Navigating the smart thermostat once the smart thermostat and equipment interface are powered up and working correctly, you can begin configuring the system. The smart thermostat uses touch screen technology, so it’s easy to navigate – just tap the icons, buttons and lists. Note: to prevent damage t...
Page 13
Min cycle off time enables you to configure the compressor off time between cycles. This is adjustable from 240 - 900 seconds. Min outdoor temp allows you to set the minimum outside air temperature at which the compressor will be disabled. This performs two functions: you can set it to prevent the c...
Page 14
Auxiliary heat stage 2 select this option when the thermostat is required to control a heat pump system with 2 stages of auxiliary heat. Connect the second stage of the auxiliary heat to this relay. Compressor/ac stage 2 select this option when the thermostat is required to control either a 2 stage ...
Page 15
Common heat/cool settings heat differential temp the minimum difference between the current temperature and set temperature before the system calls for heat. A smaller difference means a more comfortable environment, whereas a larger difference is more economical. Heat dissipation time the amount of...
Page 16
Furnace filter the furnace air filter reminder generates an alert for cleaning or changing the furnace air filter. Select this item to turn the reminder on or off, and to select the reminder interval (in hours or calendar months). This reminder also displays the date of the last filter change. Humid...
Page 17
Low temperature alert select this to set the temperature at which the smart thermostat will generate a low temperature alert. The range can be: off – no alert will be generated set temperature range of 35 – 68°f (1.5 – 20°c). High temperature alert select this to set the temperature at which the sma...
Page 18
This warranty does not cover removal or reinstallation costs and shall not apply if the damages were found to be caused by something other than defects in materials or workmanship, including without limitation, if the product: was operated/stored in abnormal use or maintenance conditions; is repaire...