Ecobee SMART User Manual - page 14
Humidifier This option will let you configure the humidifier
connected to your Smart Thermostat. Options are:
ON The system will maintain the humidifier to the
programmed level
OFF The system will not try to control the humidity in
your home
Frost Control during the heating season, the Smart
Thermostat will automatically adjust the humidity levels
to minimize frost or condensation that can form on the
windows of your home. Internet access is required for
this feature to operate properly
Humidifier Set Point Select this option to program the
desired set point for your humidifier. If Frost Control is
selected this option will display the optimal level.
Dehumidifier This option will allow you to turn your
dehumidifier on or off.
Dehumidifier Level Select this option to program the
desired set point for your dehumidifier
Ventilator Max
If your system is equipped with a ventilation system,
you can manually switch the ventilator to the maximum
setting directly from your Smart Thermostat.
After you select this item, the ventilator switches into the
maximum mode for 20 minutes. The ventilator then
switches back to its normal operating state.
Resetting the Smart Thermostat
At some point during the life of the thermostat you may
want to quickly reconfigure or restore it to the default state.
Reset Registration
Resets the connection between your Smart Thermostat
and your personalized web portal.
After this reset, you must re-register your Smart Thermostat if
you want to continue to use your web portal.
All other preferences and settings will remain the same.
23
24
Reset Preferences/Program
Resets all your preferences, reminders, alerts and programming to
the original factory default state.
WiFi settings and registration are not affected.
What to do if you move
If you decide to move there a few things you should consider with
regards to your ecobee system;
If you did not activate your personalized web portal you simply take
the Smart Thermostat with you or leave it in the house.
If you registered with www. ecobee.com, you need to update your
web portal to reflect the change.
Leaving it behind
Log onto your web account and delete the device you are leaving
behind. This terminates the association between your Smart
Thermostat and your personalized web portal.
You can always choose to add another device for your new home
with this same account.
The new homeowner will need to register the Smart Thermostat
and set up their own web portal.
Taking it with you
If you are taking the device with you, you will need to re-connect the
device to the Internet and possibly re-register if your IP information
changes. To re-register follow the original web registration procedure
in this manual.
To Reset your thermostat:
From the Home
screen, press More.
Press Settings and
select Reset from
the list. Choose the
Reset option that
suits your needs.