ECOLINE TV7091 Installation Instructions Manual - page 19
Key
in:
0 0 1 AUTO PAN
The keyboard’s LCD displays:
⎥
⎦
⎤
⎢
⎣
⎡
1
:
GROUP
AUTOPAN
:
001
DEVICE
The
AUTO PAN
LED is lid.
Stop the auto pan function
To stop the auto pan function simply press the button
AUTO PAN
again.
The LED is not lid.
NOTE: As long as the auto pan function is activated (LED is lid) it is not possible to control
the speed dome manually or choose a different function. Stop the auto pan funtion first.
AUTO FOCUS
The
AUTO FOCUS
button activated the auto focus function of the lens. Objects will be
automatically focusd when in range. The speed dome camera always focusses on the center
of the picture. Objects which are not in the center may not be focussed and displayed sharp
(especially at a high zoom ratio and a narrow viewing angle). If you want to adjust the focus
manually or to programm a preset position the auto focus function needs to be deactivated
by pressing the
AUTO FOCUS
button. (LED is not lid).
FOCUS CONTROL
The
FOCUS CONTROL
is a button that enables the user to manually set the focus and
sharpness of the picture.
NOTE: In cases where also the manual focus does not increase the sharpness of the picture
zoom out and widen the viewing angle. Try to focus again. If you have chosen a very narrow
viewing angle and a high zoom ratio the focus area is only about 0,5m to 1,5m.
IRIS CONTROL
The
IRIS CONTROL
is a button that enables the user to manually set the iris control.
NOTE: The function IRIS CONTROL is only available for the following modes: „auto exposure“,
„auto iris“ and „manual“.
NOTE: The smaller the iris opening, the bigger the focus area. It may happen that under day
light conditions (bright light, small iris opening) the whole picture is displayed sharp. During
night time use or under low light conditions (big iris opening) parts of the choosen picture
(especially in front of and behind the focus point) may not be displayed sharp.
CHANNEL SELECTION
19