Ecom ecom-DP Operating Instructions Manual - 6.4. Battery Loading
Page 16
ecom-DP
6.2. Pressure Auto -> 0 by start
The ecom-DP normally zeroes the internal pressure
sensor during switch-
on (adjustment „YES“). If the in-
strument is to remain connected to a pressure source,
so this adjustment can be modified:
- Scroll with the cursor keys
menu poin
t “Pressure auto -> 0 by start”.
- Press
- Use the cursor keys
adjustment (YES or NO).
- Confirm the modification with
6.3. Choose printer (ecom-P)
Please choose the used printer as follows:
- Scroll with the cursor keys
menu point “ecom-P”.
- Press
- Use the cursor keys
adjustment (YES = printer ecom-P or NO = printer HP
82240B).
- Confirm the modification with
6.4. Battery loading
The ecom-DP is able to work with accus and AC power
(option):
- Scroll with the cursor keys
menu point “Battery loading”.
- Press
- Use the cursor keys
adjustment (YES = using AC power for charging accus
or NO = no AC power used).
- Confirm the modification with
6.5. Display damping
The display damping can be adjusted to various meas-
urement duties. 7 damping steps can be selected (1 =
no damping; 7 = high damping).