Ecom ecom-DP Operating Instructions Manual - 6.6. Pressure Unit
ecom-DP
Page 17
Additionally the damping steps 3 - 7 enable the selec-
tion of a damping progression. This means:
not progressive:
by massive pressure changes the display does not
react faster than by small pressure changes
low progressive:
by massive pressure changes the display reacts
somewhat faster than by small pressure changes.
high progressive:
by massive pressure changes the display reacts much
faster than by small pressure changes.
- To change the adjustment, scroll with the keys
until the menu point “Damping”.
- Press
- Adjust the desired damping step using the cursor keys
- Press
6.6. Pressure unit
The measuring unit of the internal pressure sensor can
be changed. The following units are selectable:
Hectopascal
hPa
Centimetre water column
cmH2O
Millimetre mercury column
mmHg
Pound per square inch
PSI
Inch water column
“H2O
Inch mercury column
“Hg
For modification:
- Scroll with the cursor keys
menu point “Pressure unit”.
- Press
- Use the cursor keys
sired unit for the pressure sensor.
- Press
- Press
(ESC) to quit the menu “Internal”.