ECopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual - To Configure Id Services:

 eCopy ShareScan

®

 Installation and Setup Guide 

|

 153

Configuring the ID Services function

ID Services are available on compatible MFP devices that use identification devices such as card 

readers or proximity cards. ID Services allow user authentication credentials from the 

identification device to be encrypted and passed to ShareScan. This preserves security and 

streamlines the logon process by allowing the user to avoid entering authentication credentials at 

the device.

To configure ID Services:

1

In the console tree, select the device for which you want to enable the ID Service and then 

select 

Activity Tracking

.

The right pane displays the Activity Tracking information.

2

On the 

Activity Tracking

 tab, select 

Enable

 and then click 

Save

.

ID Services cannot be activated unless Activity Tracking is enabled.

3

Select the 

ID Services

 tab.

4

Enable the service and specify the settings (see Table 49).

5

Click 

Save

.

The ID Service settings are saved for the selected device.