ECopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual - Scanfront Scanner Settings
86
|
Reference: Common configuration information for connectors
ScanFront scanner settings
The list of scanner settings on the Scanner Settings tab is a subset of the scanner settings that are
available on the Canon ScanFront device (see Table 20).
TABLE 20. Canon ScanFront supported scanner settings
Option
Settings
Comments/Description
Paper Size
Mixed Originals, Letter, Legal, A4,
A5, A5R, A6, A6R, B5, B6, B6R,
Statement, StatementR
Two-Sided
Single-Sided
Double-Sided
Color Depth
(Pixel)
B&W, Text Enhance, Halftone
(error diffusion), Grayscale, Color
Resolution
100 DPI, 150 DPI, 200 DPI, 300
DPI, 400 DPI, 600 DPI
■
300 DPI provides a good compromise between
image quality and file size for text documents.
■
400 DPI provides best results when creating
searchable text.
■
600 DPI may be necessary to maintain image
quality when documents include complex
graphics.
Note:
For double-sided documents, the ScanFront
device does not support color scanning at 600 DPI.
Feeding
Direction
Auto, 0 degrees, 90 degrees, 180
degrees, 270 degrees
The Auto setting rotates the scanned image based
on the orientation of the text.
Note:
The Auto setting is available only when the
Paper Size option is set to "Mixed Originals".
JPEG
Compression
0-100 (by 10)
100% provides the highest image quality, but also
creates the largest file size.
Brightness
0-100 (by 10)
Deskew
Yes
No
Straightens a skewed image. This option can
correct a skew of up to 20%.
Note:
The Deskew setting is available only when
the Color Depth option is set to “B&W”.
Inverse
Yes
No
Creates a “negative” of the original scanned
image, which is useful for blueprints and
microfilm.