EcoSpring ES190 Installation & Owner's Manual - page 5
1
Installation & Owner‘s Manual
CONTENTS
PAGE
1. PRECAUTIONS
To prevent injury to the user, other people and/or property damage,
the following instructions must be adhered to. Incorrect operation
may cause harm or damage.
WARNING
WARNING
CAUTION
Failure to observe a caution may result in injury or
equipment damage.
Failure to observe a warning may result in death or serious
injury.
The water heating unit must be earthed effectively.
For the purpose of warning and reminding, do not remove the
labels from the unit.
The safety precautions listed here are divided into two categories.
In either case, important safety instructions are listed to which
close attention must be paid.
WARNING
Ask a professional installer for installation of the air source
heat pump water heating unit.Improper installation may result
in water leakage, electric shock, or fire.
This appliance shall be installed in accordance to AS/NZS
standards.
This appliance should not be used by children.
Repairs and maintenance must only be undertaken by a
professionalservice technician.
Improper repair and maintenance may result in water leakage,
electric shock or fire.
In order to avoid electric shock, fire or injury, if any abnormal-
ity is detected, such as smell of smoke, turn off the power
supply and contact your service agent for instructions.
Never use wire or fuse with the incorrect current loading. Use
of wrong wire or fuse may cause the unit to break down or a
ignite.
Do not insert fingers, rods or other objects into the air inlet or
outlet. When the fan is rotating at high speed, it will cause
injury.
Never use flammable spray such as hair spray or lacquer
paint near the unit. It may cause a fire.
Never touch the air outlet or the horizontal blades while the
swing flap is in operation. Fingers may be caught or the unit
may break down.
Never put any objects into the air inlet or outlet. Objects
touching the fan at high speed can be dangerous.
If the supply cord is damaged, it must be replaced by the
manufacturer or your installer or an electrician in order to
avoid damage to the unit.
An all-pole disconnection device which has at least 3mm
separation distance in all pole and a Residual Current Device
(RCD) with a rating of above 10mA shall be incorporated in
the fixed wiring according to the AS/NZS standards.
DISPOSAL: Do not dispose electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact you local government for information regarding the
collection systems available.
If electrical appliances are disposed of in landfills or dumps,
hazardous substances can leak into the groundwater and get
into the food chain, damaging your health and well-being.
1
2
2
3
4
5
7
13
15
16
A creepage breaker must be installed near the power supply.
PRECAUTIONS......................................................................................
ACCESSORIES......................................................................................
INSTALLATION LOCATION.....................................................................
INSTALLATION .....................................................................................
PIPELINE CONNECTION .......................................................................
ELECTRIC CONNECTION.......................................................................
OPERATING INSTRUCTION...................................................................
RUNNING AND CAPABILITY...................................................................
MAINTENANCE......................................................................................
SPECIFICATIONS...................................................................................