ECOVACS DEEBOT D77 Instruction Manual - 4. Maintenance
4. Maintenance
4.1 Cleaning the Robot and Charging Dock
4.2 Main Brush, Side Brushes and Driving Wheels
Turn off the robot
Cleaning the Robot Cleaning the Charging Dock
Remove the power plug from receptacle
It’s suggested to clean the Main Brush after every 4~5 cleaning cycles.
Use a cleaning cloth dampened with water or neutral detergent, wipe and dry the product. Do not let water
penetrate inside the product.
Cleaning the Main Brush
Unscrew the screw on the
Main Brush and remove
the frame of the Main
Brush.
Take out the Main Brush.
Remove the hair on the Main
Brush with the provided Main
Brush Cleaning Tool to cut
off the hair.
Remove any hair and dust
around the belt.
Re-install the Main Brush and
its frame. Tighten the screw.
To clean the side brushes,
pull them out and clean
with dry cloth.
Clean and Replace Side Brushes
To replace, insert each side
brush into the slot with the
matching color. Press until
you hear a click.
Tips:
1. The side brushes incur a lot of wear. We suggest you inspect them after each use and change if necessary.
2. When installing the side brush, make sure its color matches the slot color or the brush will not work normally.
Cleaning the Driving Wheels
Use the main brush cleaning tool to remove any dust or hair tangled in the driving
wheels.
Maintenance
EN