EMIX EMKP-8001 Operational Manual - page 14
3.5 Unit Setup - Group SAVE setting
Zone grouping consider a pre-configured action which means user can select the require zone and
selected zone together. enable easy access to a group of zone when paging.
Kindly select the preferred channel where you wish to get
Press [Save + no.1] button at the same time
Which means Zone 01, 02, 03, 04 & 05 are grouped together in Group 1.
Press [Save + no.8] button at the same time
Notes: Repeat the step shown above to program other grouping.
3.6 Unit Setup – Group LOAD setting
Zones grouping that had been grouped during the earlier stage
Press [Load button and no.1] at the same time to load saved zone groups from particular memory:
Kindly find the groups setting shown below
After performing a load function from the paging console of recall from
press the CALL button to perform paging.
setting
configured action which means user can select the require zone and
enable easy access to a group of zone when paging.
channel where you wish to get-together into same group.
at the same time to save zones group as shown below to
Which means Zone 01, 02, 03, 04 & 05 are grouped together in Group 1.
at the same time to save zones group as shown below to memory 8:
Notes: Repeat the step shown above to program other grouping.
setting
Zones grouping that had been grouped during the earlier stage and this can be recall back
at the same time to load saved zone groups from particular memory:
shown below which has been saved in memory 1.
erforming a load function from the paging console of recall from Group 1 consists of zone 1, 2, 3, 4 & 5
button to perform paging.
14
configured action which means user can select the require zone and group the
together into same group.
as shown below to memory 1:
as shown below to memory 8:
can be recall back for paging purpose.
at the same time to load saved zone groups from particular memory:
Group 1 consists of zone 1, 2, 3, 4 & 5,