EMOTION motion sprint 600 User Manual - page 16
User manual motion sprint 600 med /600
Version 1.1
Page 16 of 21
5
Maintenance and Servicing
All cardio machines from emotion fitness are characterized by excellent quality. The units are durable and only
need little maintenance, to function over a long period of time. The required maintenance hast to get
conducted conscientious.
You can only keep the safety level by checking the unit regularly for damage and attrition. Damaged parts need
to get replaced right away and the unit needs to get decommissioned until its repair.
5.1
Failure/ Elimination of failures by trained personnel
Pull the power plug before working on the machine!
First, always check the power supply of the grid.
Leave the unit without power and check the plug connections of the unit.
Reconnect the treadmill to electricity.
If the unit still doesn´t work, contact your distributor.
5.2
Instructions for the error condition detection (failure)
In case failure occurs at a machine that you cannot classify, please contact emotion fitness GmbH & Co. KG. For
every error report please hold ready the serial number and model type of the faulty machine. It is important to
diagnose properly and to provide the correct spare parts!
5.3
Instructions for preventive maintenance by the operator
Check the unit visually before every usage but at least daily particularly for damaged parts, loose connections
and atypical noises.
Despite an excellent quality management system the unit has to get inspected intensely every six months.
Document the inspection for medical machines in the medical booklet:
Check all connections and welding seams.
Clean the unit well.
Check all screws for tightness.
In general:
Clean the devices with mild purifier and a wet cloth to get off aggressive sweat. Dry the device
afterwards.
The usage of spray bottles is not allowed; it has shown that the unit never dries at spots that can´t
be reached. Rust may occur.
Pay attention that no liquids run into the monitor as it could destroy parts of the electronic.
If disinfection is required only useacryl-des® disinfection cloths (see
http://www.schuelke.com/
).
Beware to not put the machines on thick rubber mats. The running belt has to be free to sway.
Check the casing for tightness.
When using the machine regularly please check the unit parts visually, especially screws, bolts,
welding seams and other fixtures.
Only use original spare parts, therefore please contact us.
5.4
Maintenance for an authorised professional.
If you have problems with the unit that you can´t solve yourself, or for which you have to open the casing
inform the service from emotion fitness GmbH & Co. KG. The authorised service will help you fast and
competent or will give you proper instructions to do so yourself.
5.5
Performance to the safety control (STK) according to the Medical Devices Operator Ordinance
The sprint SL/ SE med is a medical product and thereby has to undergo a technical measurement check every 12
months. The responsibility for the conduction is at the operator. The date of the next control is shown on the
control badge, which you find next to the type plate.
Contact your dealer in case you need a reference.