Emotiva UMC-200 User Manual - Menu : Input

Page 24

UMC-200

Advanced Operation and Configuration (Menu)

The UMC-200 offers many advanced configuration options. This section will provide a brief 

description of each, and instructions on how to access it. 

Menu : Input

Allows you to directly select from the full list of available inputs.

Menu : Mode 

Allows you to select from the full list of available decoder modes for your chosen input.

Menu : Trims

Allows you to individually adjust the levels of each speaker (unlike the Trims on the remote 

control, these are “permanent”, and remain in effect until changed.)

Midnight Mode (second page); allows you to limit the dynamic range of program material. 

This makes it easier to hear dialog and quiet sounds when you are playing the TV quietly 

(as you would late at night).

Center Width, Dimension (second page); these affect the decoder parameters in certain 

modes to produce a more pleasing effect.

Menu : Zone

Allows you to control the default settings for each zone (Zone 2, Zone 3). From this menu 

you can set each Zone Off or On, and set the default Volume level and audio source for 

each zone.

Menu : Setup : Input Setup

Tuner Setup; allows you to configure the UMC-200’s internal AM/FM tuner, including 

creating and changing channel presets.

Input Setup; allows you to configure the video and audio source input associated with each 

input, change the displayed name, change lip synch settings, set an individual input level 

trim for that input, and associate one or both triggers with that input.

Note: With some inputs, the input is “pinned” to a particular input connector. For 

example, HDMI 1 cannot be changed away from the HDMI 1 rear panel connector.

Remote Hot Key; allows you to program which input is associated with each of the Direct 

Input hot keys on the remote control. For example, you might want to associate the “TV” 

button on the remote control with the input your cable box is attached to.

Trigger 1 Mode, Trigger 2 Mode; allow you to configure how each of the two trigger Outputs 

operate.