Emotiva XPR-1 User Manual - Xpr-1 Front Panel

Page 7

XPR-1

XPR-1 Front Panel

STANDBY                                                          PEAK                     DIM                  METER           ORIENTATION

1

2

3

4

6

5

7

1. Accent Lighting

Blue accent lighting is provided by cool, long lived LEDs.

2. Channel Status and Meter LEDs

The display has a single Channel Status LED (the bottom one), and a blue LED Bargraph 

Meter above it. Either or both are active depending on the configuration chosen. If a fault 

occurs, the LED above the Standby button, the Channel Status LED, and the LED Bargraph 

Meter LEDs will flash red.

3. Standby Button (and Power LED)

Press to switch the amplifier On; press again to return to Standby. The LED above the 

button will illuminate red for Standby, blue for On, and blinking red for a Fault condition.

4. Peak Button

Press once to switch the LED Bargraph Meters into Peak Meter mode; press again to select 

Peak Hold Mode.