Emotiva XPR-1 User Manual - Power Supply:
Page 17
XPR-1
Power Supply:
2.5 kVA toroidal power transformer.
240,000 uF of total storage capacitance.
Input Sensitivity (for rated power; 8 Ohm load):
3.5 V
Gain:
29 dB.
Input Connections:
RCA; unbalanced (audiophile quality, machined, solid brass, gold plated).
XLR; balanced.
Input Impedance:
100k ohms (unbalanced).
51k ohms (balanced).
Trigger:
Trigger Input: 5 - 20 V (AC or DC);
Trigger Output: 12 VDC; can drive any load up to 50 mA.
Power Requirements:
115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (auto-switching).
Protection:
The XPR-1 is protected against excessive operating temperatures, shorted speaker
connections, ground faults, and other common fault conditions. If a fault occurs, the LED
above the Standby button, the Channel Status LED, and the LED Bargraph Meter LEDs
will flash red. Returning the XPR-1 to Standby or switching off the AC Power will reset the
protection circuitry.
Dimensions:
17” wide x 9.5” high x 19.5” deep (includes feet and binding posts;
requires an additional 3 - 4” of depth clearance to accommodate the power cord).
27” length x 25” width x 16” height (double boxed).
Weight:
99 lbs (net); 113 lbs (boxed).