Emotiva XPR-1 User Manual - Xpr-1 Rear Panel

Page 9

XPR-1

XPR-1 Rear Panel

2

3

5

   INPUT             OUTPUT

 5-12 VDC          12VDC

TRIGGER

115V  230V

UN-BAL

    BAL

+

--

4

1

6

8

7

1. Speaker Terminals

Super heavy duty, audiophile-grade, gold plated, and clear acrylic five-way binding posts 

accept the heaviest speaker cables and lugs as well as standard banana plugs and bare 

wire. 

2. Trigger Input and Trigger Output

The XPR-1 is switched On (from Standby) when a trigger signal is presented at the Trigger 

Input; the XPR-1 returns to Standby when the trigger signal is removed. When the XPR-1 is 

on, a 12 VDC signal is sent from the Trigger Output to control other devices.

3. Unbalanced (RCA) Input

Gold plated, solid machined brass RCA jack accepts line level unbalanced input.

4. Input Selector Switch

Switches between the Unbalanced (RCA) and Balanced (XLR) input. Up selects the 

Unbalanced input and Down selects the Balanced input. Only one type of input can be used 

at once. (It is acceptable to plug in both a balanced and an unbalanced source and use the 

switch to select between them, but only one will be active at once.)