EYEZONE B1080PX-3 Quick Manual

1 

B1080PX-3

QUICK GUIDE 

1. Hardware Overview 

Power Switch: 

Toggle between main power on & off.

DC Input: 

For the power adapter. (DC 12V / 1.5A)

IR Input: 

Connects to PIR Sensor (optional) or IR Cable (optional). 

VGA Output: 

Connects to devices that support VGA input. (LCD、projector)

HDMI Output: 

Connects to devices that support HDMI input. 

RJ-45 Ethernet Connector: 

Connects to router or PC by RJ-45 Cable. 

Audio Output: 

Connects to sound input. (HDTV with amplified speaker) 

Video Output: 

Connects to devices that support Video input. (HDTV、projector) 

RS-232 Connector: 

Used for computer control with ASCII command. 

“CF READY” LED: 

Steady green confirms that the CF card is inserted correctly.   

CF Card Socket: 

For CF memory card. 

“RESET” Button: 

To restart the B1080PX-3.   

A u g   2 5 ,   0 9

3 4 5 3 5 0 5

2

2. Network Setup 

Confirm the B1080PX-3 is already connected to the network.   

2.1  Setting the Network from the OSD Menu   

Step1: 

In the main menu, using the “▼” button on remote control to select the “SETUP” item, and then 

press the “ENTER” button. You will be presented with the B1080PX-3 settings screen. 

You can also press the “SETUP” button on remote control to directly open the settings screen. (If there 

is file that is being play, please stop first.) 

Step2:

 There are five groups of sub-menu in the main menu (“Network Setup”, “FTP Setup”, “Video 

Setup”, “Other Setup” and “Scrolling Setup”). 

Step3: 

In the Network Setup item 

Network with: 

Select your network connection Disable/ RJ45. 

IP Assigned by DHCP: 

If you have a DHCP-enabled router, please select “On”, and then the 

router will automatically assigns an IP address to the B1080PX-3. If you don’t have a 

DHCP –enabled router, select “Off” and type the network information in “Assign IP Address”.

Assign IP Address: 

If the B1080PX-3 is connected to a network without a DHCP server or you 

want to use Local FTP Server function, enter the fixed IP address, Mask, Gateway and DNS for 

the B1080PX-3.

Step4: 

After finish setting, press the Setup button to save and quit.