EYEZONE B1080PX-3 Quick Manual - page 2
3
2.2 Setting the Network from the IP Detect Tool
With the bundle tool “IP Detect”, user could search B1080PX-3 on the local area network. User could
also change the IP setting via this tool.
Step1:
Insert the driver CD into your CD-ROM drive, then the autorun function will start up the shell
program. If the autorun window does not display, please execute the Autorun.exe program to bring out
the autorun screen.
Step2:
Click on the Install IP Detect to install the IP detect tool.
Step3:
Double click on the icon and start the tool.
Step4:
Click on the “Auto Detect” button, and it will show all available B1080PX-3 in the local area
network.
4
Step5:
Select the B1080PX-3 that you want to configure (by identifying the MAC address).
Step6:
The default IP mode of B1080PX-3 is DHCP. User should change the mode to “Manual”, if he
wants to assign a static IP address to B1080PX-3. Then enter the preferred “IP”, “Net Mask” and
“Gateway” in the “Network Setting”. Finally, click on the “Setup” button for completing the setting.
NOTE:
The IP setting will not show on the OSD menu instantly, but it should be available after
pressing “Setup” button. The prefer IP address will show on the OSD menu when B1080PX-3
restart.
PS. Please consult the B1080PX-3 manual on Driver CD for more detail.