EYEZONE P102-8 User Manual - page 15
26
Force UPC-A to EAN-13 format enable
Force UPC-A to EAN-13 format disable
27
Situation Check
Point
No Picture
1. Check if the power supply is connected.
2. Make sure the P102-8 is turned on.
No response from
the remote control
1. Make sure there is a clear view between the remote
control and the device.
2. Change the remote control’s batteries.
The Laser Scanner is
on, but cannot read
bar-codes.
1. The scanner window is dirty and must be cleaned.
2. The presented barcode type is not enabled. (refer to 8)
3. The barcode type presented is not supported .
Memory card
1. Push cards gently and securely.
2. If the card does not insert easily, check the direction.
3. Confirm format of the card. The P102-8 supports CF, SD,
MMC and MS (Pro) memory card.
No sound
1. Check if the mute function is on.
2. Check if the volume is turned up.
8. TROUBLESHOOTING