EZ Breathe 400 Installation Manual - What’S Inside
Before installing your
EZ Breathe
ventilation unit, make sure that you
have the right model and accessories. Make sure that the total length
of the unit is taller than your foundation wall.
The following items should be included in the box. If parts are
missing, contact our customer service at 1.866.822.7328
z
Owners Manual
z
(4) #8 x 1 ¼” Truss
Quadrex Screws
z
10 Year Warranty Card
z
(1) 6" Pipe
z
6” Flex Exhaust Vent
z
(6) Screws #8 x 2”
z
(2) Cable Tie
z
(6) Screws #8 x ½”
z
(8) ¼” x 1 ¼” Plastic Anchors
z
(1) EZ Breathe Unit
Supplies needed:
Electrical reciprocal saw or 6" diameter hole saw.
Note: a 6 ¼” hole saw may be used if a 6" saw is not available
z
Electric Drill – ¼” concrete drill bit or 6" core bit assembly
z
No. 2 Screwdriver
z
Measuring Tape
z
Duct Tape
z
Hammer
z
Tin Snips
z
1 tube of clear silicone caulking
z
Level
WHAT’S INSIDE
2