Contents: 1. Safety 2. Specifications 3. Control panel 4. Treadmill components 5. Assembly 6. Adjusting & testing 7. Operating instructions 8. Important notes 9. System connection diagram 10. Maintenance 11. Running belt adjustment 12. Troubleshooting ezygym.Com.Au phone: 1300 ezy gym (1300 399 496)...
1 - safety attention: carefully read this manual before using the machine. ·the treadmill is for indoor use only. Keep it free from moisture and splashes of water. Don’t put anything onto the machine. ·keep the machine away from combustibles and flammables. ·make sure that the four feet of the tread...
2 - specifications input voltage: 220v + 10% (50hz or 60hz) environment temperature for working: 0-40°c. Maximum input power: 2.5 or 3* hp electric current is less than 5a. Speed: 1.0 – 12.0 or 16* kilometers/hour (±5%) time limits: 00:00 - 99:99 (minute: second) distance: 0.00 - 9.99 kilometers. Sl...
4 – treadmill components 1. Control panel 2. Left and right column 3. Motor cover 4. Running belt 5. Adjusting screws for running belt 6. Frame 7. Motor 8. Foldaway airspring 9. Securing latch.
5 - assembly 6 - adjusting and testing 1. Put the safety key onto the control panel 2. Before turning on the power, please check: correct voltage, plug is properly grounded, the running belt moves smoothly with no noise. 3. Press the on/off button, the treadmill will run with a low speed (1.0km/h), ...
7 - operation instructions 1. Plug into 240v power outlet. Stand on the plastic side boards beside the running belt with hands holding the handlebars. Insert the safety key into the safety key socket on the control panel then press the start button. The treadmill will start running at about 1.0 km/h...
10. Ezy gym is committed to improving the quality of our product. We have added another 12 pre-set training programs to the latest fit 150 treadmills (including pre-set inclination changes). Details of 16 pre-set programs time min 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 p1 - km/h 2 4 6 10 6 10 6 10 6 10...
8 – important notes 1. When using the treadmill for the first time, please begin with a slow speed, and raise the speed gradually. 2. The strides should suit the speed of belt. Don’t over stride. 3. Don’t use the safety key as a stop button; otherwise the treadmill may be damaged. Only in case of em...
10 - maintenance before cleaning or maintenance, please pull the power cable from the wall socket (not from the treadmill) 1. Cleaning: the treadmill should be kept clean, preferably with a cover over the belt & motor cover. Clean it every one to two months. When cleaning, open the cover, clean the ...
12 – troubleshooting problems possible reason check panel displays nothing when switched on 1.Plug & socket aren’t well connected 2.Panel is not connected properly 3.Fuse is damaged 1.Reinsert plug 2.Reconnect panel 3.Replace the fuse the running belt stops while panel working normally the machine’s...
Contact online: www.Ezygym.Com.Au click on ‘contact us’ button for renewals, pickups & support email: queensland qld@ezygym.Com.Au new south wales nsw@ezygym.Com.Au victoria vic@ezygym.Com.Au sms: queensland 0448 ezy gym (0448 399 496) new south wales 0488 ezy gym (0488 399 496) victoria 0409 ezy gy...
