F&V MeticaFM 7 User Manual - page 10
6
OSD (On-screen Display) MENU
MeticaFM 7
10
• Camera Mode
Some Canon DSLR cameras output signals that do not fill the entire pixel resolution of the
monitor. This feature makes it so the signal fits the entire horizontal resolution.
[3] Display
• Scan Mode
Use this setting to change the Scan Mode of your monitor. The available options are:
Standard, Overscan, Pixel to Pixel. (Default: Standard)
• Flip
Use this setting to flip the display direction. The available options are: Off, Horizontal, Vertical,
Horizontal & Vertical.
• Freeze
Use this setting to freeze the current image on the screen.
• Histogram*
Use this setting to activate the Histogram in the bottom, right corner of the screen.
Use the Histogram to help understand the overall exposure of your image.
[PLEASE NOTE: This function is only available for MeticaFM 7 units that have upgraded to
the advanced chip.]
• Zoom Ratio
When Zoom is enabled, your screen will be divided into “zoom sections.” The zoom
sections depend on your settings under Zoom Ratio. For example, 2× will give you 4 zoom
sections, 3× will give you 9 zoom sections, and 4× will give you 16 zoom sections. Using
the scroll wheel, you are able to scroll through the individual zoom sections. The selected
zoom section will be highlighted with a red border. Pressing the scroll wheel will magnify
the selected zoom section so that it takes up the entire display.