F&V MeticaFM 7 User Manual - page 9
6
OSD (On-screen Display) MENU
MeticaFM 7
9
[2] Color
• Check Field
Use this feature to cycle through color overlays, options used for calibrating your monitor to
a color bar signal. Available color overlay options are: Off (Default), Blue, Green, Red, Mono.
If you would like to modify the color temperature of your display while the Check Field
function is on, please refer to the Color Temperature section below.
• Range Error
Use this setting to activate the Range Error function. It cannot be used in conjunction with
False Color.
[PLEASE NOTE: This function is only available for MeticaFM 7 units that have upgraded to
the advanced chip.]
• False Color *
Use this setting to activate the False Color function. It cannot be used in conjunction with
Range Error. A color key will be displayed on the monitor for exposure reference.
[PLEASE NOTE: This function is only available for MeticaFM 7 units that have upgraded to
the advanced chip.]
• Color Temperature
Use this setting to manually set the Color Temperature of your display. The available options
are: 3200K, 6500K, 9300K, User. ( Default: 6500K).
When “User” is selected, you can change the color temperature by adjusting the Red/
Green/Blue levels from 0 to 255.