Fabyka FA Series Installation Manual And User's Manual - Installation

Page 

Installation

 (Continued)

Upper chimney

Wall mount

range hood

Lower chimney

8” Round duct (exhaust)

Air Movement Direction

Note:

 Type “A” anchors are designed 

for dry wall. Not to be used with any 

other types of walls.

Calculate

 the height of the duct tube and extend approximately 6” (15 cm) longer than required, connect the 

lower end of the duct tube to the range hood and the upper end to the vent system. Make sure the main electri-

cal supply remains disconnected then connect power plug to the electrical cord or wall plug.

Have one person carefully position both upper and lower chimneys on the range hood, let the second person 

slide the sides of the chimneys into the 1/8” gap. Fasten both chimneys with four Type “C” screws.

Install grease cup and aluminum filters then check the operation of the range hood.

8.

9.

0.

Installation Overview

Mounting Bracket

For sheet rock only

A B

C

A B

C