Fabyka FA Series Installation Manual And User's Manual - Venting Methods
Manual is about: Wall Mount Range Hood FA Series
of
20
Venting Methods
Page 7
This range hood is factory set for venting through the roof or wall.
Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.
IMPORTANT:
NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or
garages. All exhaust must be ducted to the outside.
Use metal/aluminum duct work only.
Fasten all connections with sheet metal screws and tape all joints with certified Silver Tape or Duct Tape.
Use caulking or silicon to seal exterior wall or roof opening around the cap.
•
•
•
•
•
•
Option 2:
Vertical roof venting
Horizontal wall venting
Option 1:
Side wall cap
Roof cap