Fabyka FA Series Installation Manual And User's Manual - Range Hood Operations
Range Hood Operations
Page
Power
Decrease Value
Control Panel Layout and Buttons Configurations:
Light
Increase Value
Blower Power Indicator
Blower Speed Indicator
Power-On Elapsed Digital Timer
Power-Off Delay Digital Timer
Power-Off Delay Timer Indicator
Light Power Indicator
The island canopy hood is designed to remove smoke, cooking vapors and odors from the cook top area. For
best results, start the range hood before cooking and allow it to operate several minutes after the cooking incom-
plete to clear all smoke and odors from the kitchen.
Button functions:
Power: Power ON/OFF and activate power-off delay timer.
Decrease Value: Blower (motor) speed decrease, timer value decrease, and enter timer mode.
Increase Value: Blower (motor) speed increase timer value increase, and cumulative timer reset.
Blower Power Indicator: Lights up when blower (motor) is running.
Blower Speed Indicator: Shows current blower (motor) speed (1-6).
Light Power Indicator: Lights up when lights turned on.
Light: Turns ON/OFF and dim halogen lights.
Power-On Elapsed Digital Timer: Indicates the accumulated time the system is running.
Power-Off Delay Digital Timer: Indicates the length of time left for delay off function.
Power-Off Delay Timer Indicator: Lights up when auto-shutdown delay timer function is on.
Controls:
Automatic cleaning reminder:
When blower (motor) starts to rotate, cumulative running time will be shown in Power-On Elapsed
Digital Timer. This timer icon flashes when 30 hours is up and reminds user to clean the aluminum
filter.
After cleaning the filter and when the motor is not in use, press and hold Increase Value button over
3 seconds to reset the timer. Please note that turning off the system will not reset the Power-On
Elapsed Digital Timer.
Adjusting the blower (motor) speed:
Press Power button once to turn on the system. The Blower Power Indicator icon flashes showing
that the blower (motor) is ready. Decrease Value button will decrease the speed of the blower (mo-
tor) from 6 to 1 (strongest to quietest). Increase Value button will increase the speed of the blower
(motor) from 1 to 6 (quietest to strongest).
Press Power button once to turn off the system.
Note: The system saves user configurations, hence settings such as light, timer and blower (motor) speed
will remain the same the next time it is turned on.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•