Faderfox 4midiloop User Manual - page 6
Master Section
The Main volume potentiometercontrols the overall output level and the Mix potentiometercontrols
the headphone mix between the Master and the Monitor signal. You can adjust the Monitor Output
level for your headphones by using the Vol potentiometer. The desired headphone signal can be
activated with the Monitor button underneath the EQ section. Pushing the Shift and Monitor button at
the same time, switches the advanced deck panel on or off.
Snap snaps into the closest beat of the Waveform display.
Quant enables the quantised change between both Hotcues and/or loops for real-time remixing.
Additionally by pressing Shift, the PFL Level Led’s can be switched on or off in PFL mode.
CD Mode plays a short stutter loop if the Deck is paused. This action simulates the cueing occurrence
of a traditional DJ CD player. Additionally by pressing Shift, the PFL Level Led’s can be switched on
or off in AFL mode.
LFO Reset resets the LFO for all LFO based effects.
Cruise activates the automatic playback of an entire playlist (Autoplay).
Tab tapping rhythmically on this button manually sets the master clock tempo. Additionally by pressing
Shift, midi clock sync can be switched on or off. The Tab Led is blinking, if the midi clock sync is
switched on.
By pushing CD Mode and Tab at the same time, Get monitor state is activated and synchronises the
4midiloop Led’s with the current status of the Traktor Software. By pushing CD Mode and Tab at the
same time (2 seconds), Get monitor state is activated and synchronises the Traktor Software with the
current status of the 4midiloop potentiometers and faders.
Browser Section
A rotary button (Select) with a push function allows browsing through folder and playlists. Simply turn
the push encoder to find the track you want and push to expand the browser window to fill the screen.
Additionally, by activating the Shift button, the folder list can be scrolled (Tree: track collection,
playlists, itunes etc.), which can be opened and closed by pushing the browser rotary button. The
chosen track can be uploaded to the deck by using the Load button underneath the EQ section. By
pushing the Shift and Load button at the same time, the deck size can be changed.
A track can be uploaded from the browser list to the preview player with Preview Load. By pressing
the Preview Play button, the chosen tracks can be stopped or started again (if pushed once more).
Additionally by pressing Shift, the track moves backwards. If Shift and Preview Load are pushed at
the same time, the track moves forwards. Favorites provide direct access to Playlists or folders.
Favourite tracks can be selected via Prev or Next and uploaded to the browser.
If Preview Load and Favorites Prev are pushed at the same time (2 seconds), System Mode is
activated and the System Led is lit. In System Mode, you can manage following four basic settings:
Pushing button 1 in the FX1 section, defines the midi channels 1 to 4.
Button 2 in the FX1 section defines the midi channels 5 to 8.
Button 3 in the FX1 section defines the midi channels 9 to 12.
Button 4 in the FX1 section defines the midi channels 13 to 16.
Pushing button 1 in the FX2 section, defines „linear“ line fader curves.
Button 2 in the FX2 section defines „rapid“ line fader curves.
Button 3 in the FX2 section defines „switch“ line fader curves.