Faderfox micromodul uc4 User Manual - page 5
Features
-
Universal controller for all kinds of midi controllable hard- and software
-
iPad compatible with camera connection kit
-
Control surface script for Live 8/9 is shipped with the controller
-
USB interface with bus powering - class compliant / no driver necessary (consumption < 500mW)
-
MIDI in and out ports with routing and merge functionality
-
8 push encoders without detents (resolution about 36 pulses)
-
Encoder push buttons can send commands (fully programmable)
-
8 buttons with LED for switchable parameters
-
4-digit-display to show control values and programming data
-
14 bit high resolution encoder mode for sensitive parameters
-
Programmable value ranges with min/max values
-
Data feedback for encoders and faders avoid value jumps
-
All controls (incl. push buttons) fully programmable in the device by channel, type, number and mode
-
Different command types like control change (CC), pitch bend, aftertouch, program change and notes
-
Advanced programming functions like copy, paste and group sets
-
8 independent groups for encoders and faders/buttons (controlled by shift key)
-
About 264 commands per setup (33 controls x 8 groups)
-
18 setups with backup/restore function contain all controller settings
-
Very compact design in a black casing with metal faceplate (laser engraving, 180x105x70 mm, 350 g)
System requirements
-
PC or Mac with a free USB port (1.0 or higher) or any USB hub (connection by inclosed USB cable)
-
iPad with iOS5 or higher (connection by apples camera connection kit)
-
MIDI device with standard midi in port (5pin DIN socket connection by enclosed adapter cable)
-
USB power adapter (5V min 100mA) if you want to control only midi gear