Fagor Advance Technical Manual - page 9
Page 9 of 22
10/11/2009
B4 (Button P3)
o
If this button is pressed once, the dishwasher starts to wash with programme 3
o
If the button is pressed for 3 seconds, this activates the function corresponding to the right
icon (Cold rinse or indefinite cycle, depending upon the DIP1 configuration)
o
If DIP1=0 and DIP2=0: Cold rinse: The cold rinse solenoid valve remains on while
the button is pressed
o
If DIP1=1& DIP3=1: Indefinite cycle: The dishwasher remains on indefinitely. If the
indefinite cycle is active, pressing the button again for 3 seconds will deactivate it
L4 (LED P3)
o
If the appliance is washing, this LED remains lit. It is also lit if the appliance is in PAUSE
mode, i.e., if the door has been opened
o
If the cold rinse function or the indefinite cycle is on, the LED flashes
o
If the appliance is not washing, this LED is off.
Note: Depending on the model, this LED may or may not exist
L5 (LED Machine Ready)
o
If the tank thermostat has reached the programmed temperature, this LED lights up
o
If the tank thermostat has not reached the programmed temperature, this LED is OFF
The models without a machine ready LED, there are 2 displays.
Rinse temperature
Washing temperature
CSI INSTALACIONES