Fakir SMART S350 Instruction Manual - page 19
19
Fold up the housing part [21].
After cleaning of brush-roller, turbine wheel
and belt, close the turbo brush again in
reverse order.
Electrical suction brush [O] (Optional
accessory): With the motor-driven, powerful
brush roller, even the deepest entrenched
dirt is removed from the pile of textile floors
of every type.
WARNING: Never reach into the rotating
brush roller when working with the turbo
suction brush or electrical suction brush.
Operation
Vacuum-cleaning
Ensure before use that all filters and the
dust bag are correctly inserted and are not
damaged. The excellent filter effect,
particularly important for allergic persons,
is achieved only with intact, correctly
employed filters.
WARNING: Check the device and the
power cable before every use. A damaged
device means risk of injury and must not
be employed.
• Place on the required nozzle.
• Pull the mains cable out with the plug to
any arbitrary length and plug it into a power
outlet. The small MIN-LED in the display
[23] flashes = Stand-by-stage
Operator panel with innovative
convenience
• Sensor-touch operating elements, in order
to operate the S 350 contact-free with the
hand or foot.
• Switch ON [25] The first three LED's in the
display [23] light up = ECO stage
• Switch OFF [25] The small MIN-LED in the
display [23] flashes = Stand-by stage
• Increase the suction force with the Plus
field [24]
• Reduce the suction force with the Minus
field [22] > According to the suction force
which is set-adjusted, one (MIN) to five
(MAX) LED's light up in the display [23].