- DL manuals
- Falcon
- Security System
- TBM-18
- Operating instructions manual
Falcon TBM-18 Operating instructions manual
Summary of TBM-18
Page 1
2.4 ghz wireless surveillance system operating instructions teste d com p ly with fcc standards model # tbm-18 before operating this product, read, understand, and follow these instructions. Be sure to save this booklet for future reference..
Page 2
1 important safety instructions warning: to avoid the risk of electrical shock, always make sure the product is unplugged from the electrical outlet before relocating, servicing, or cleaning it. • this product is intended for non-commercial, household use in providing video surveillance. • this prod...
Page 3
2 general description: the wireless, bear video camera (model #tbm-18) transmits video and audio signals at a frequency of 2.4 ghz to the video signal receiver (model #vsb8rx). The video signal receiver outputs these signals via cable to your tv/vcr for monitoring and/or recording. Equipment & acces...
Page 4
3 installation: bear video camera (model #tbm-18) 1. Power by either the battery and dc power of the bear video camera. 2. Position the video camera in the desired location. Note: the transmission range of the bear video camera at open side up to 150 ft. Real distance is depends on its operating env...
Page 5
4 2.4ghz receiver (vsb8rx) yellow plug video /video cable tv video input jack 3.5 plug audio input jack white plug 2. Connect the ac power adaptor jack end to the 9v dc power input jack of the receiver. 3. Select/match the receiver channel to the desired video camera transmission channel. 4. Plug th...
Page 6
5 this therefore unit is for those who tv set without a/v port 2.4ghz receiver (vsb8r x) video /video c able 3.5 plug coaxial cable input signal selector tv antenna t v o ut an t in video m odulat or an t en n a swi tc h vh f/u h f a/v i n ac a dapter yellow plug white plug transfer connector troubl...
Page 7
6 technical specifications transmitter receiver power supply (ac power adaptor) input: 110v ac output: 9v, 350 ma operating temperature 32 ° f (0° c) ~ 126° f (45° c) operating environment 70 ° f (25° c) ~ 112° f (40° c) channels four (4) receiver sensitivity -- -90dbm channel space 18 mhz frequency...
Page 8
7 limited warranty this item is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original date of purchase under normal household use. Within the warranty period, we will either repair or replace the product at our option. This warranty extends only...
Page 9: 2.4 Ghz
2.4 ghz wireless surveillance system operating instructions teste d com p ly with fcc standards model # tcm-30 before operating this product, read, understand, and follow these instructions. Be sure to save this booklet for future reference..
Page 10
1 important safety instructions warning: to avoid the risk of electrical shock, always make sure the product is unplugged from the electrical outlet before relocating, servicing, or cleaning it. • this product is intended for non-commercial, household use in providing video surveillance. • this prod...
Page 11
2 general description: the wireless, clock video camera (model # tcm-30) transmits video and audio signals at a frequency of 2.4 ghz to the video signal receiver (model #vsb8rx). The video signal receiver outputs these signals via cable to your tv/vcr for monitoring and/or recording. Equipment & acc...
Page 12
3 installation: clock video camera (model #tcm-30) 1. Power by dc power of the clock video camera. 2. Position the video camera in the desired location. Note: the transmission range of the clock video camera at open side up to 150 ft. Real distance is depends on its operating environment. If you are...
Page 13
4 2. Connect the ac power adaptor jack end to the dc power input jack of the receiver. 3. Select/match the receiver channel to the desired video camera transmission channel. 4. Plug the ac power adaptor into a standard 120v ac electrical outlet. 5. Slide the on/off switch to the on position. 6. Tele...
Page 14
5 check to ensure the receiver channel is set properly for the desired video camera. Unclear picture reception. Shorten the transmission range/distance between the transmitter and receiver. Reposition and/or adjust the clock camera. Check 9v batter power is running out or not. Unclear picture focus....
Page 15
6 limited warranty this item is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original date of purchase under normal household use. Within the warranty period, we will either repair or replace the product at our option. This warranty extends only...
Page 16: 2.4 Ghz Jewel Box
2.4 ghz jewel box wireless video camera operating instructions teste d com p ly with fcc standards model # tjm-275 before operating this product, read, understand, and follow these instructions. Be sure to save this booklet for future reference..
Page 17
1 important safety instructions warning: to avoid the risk of electrical shock, always make sure the product is unplugged from the electrical outlet before relocating, servicing, or cleaning it. • this product is intended for non-commercial, household use in providing video surveillance. • this prod...
Page 18
2 general description: the wireless, jewel box video camera (model #tjm-275) transmits video and audio signals at a frequency of 2.4 ghz to the video signal receiver (model #vsb8rx). The video signal receiver outputs these signals via cable to your tv/vcr for monitoring and/or recording. Equipment &...
Page 19
3 installation: jewel box video camera (model #tjm-275) 1. Power by either the battery and dc power of the jewel box video camera. 2. Position the video camera in the desired location. Note: the transmission range of the jewel box video camera at open side up to 150 ft. Real distance is depends on i...
Page 20
4 2. Connect the ac power adaptor jack end to the dc power input jack of the receiver. 3. Select/match the receiver channel to the desired video camera transmission channel. 4. Plug the ac power adaptor into a standard 120v ac electrical outlet. 5. Slide the on/off switch to the on position. 6. Tele...
Page 21
5 shorten the transmission range/distance between the transmitter and receiver. Reposition and/or adjust the jewel box camera. Unclear picture focus. The video camera is set at 4.9 ft (1.5 m) with a free focus feature. Technical specifications transmitter receiver power supply (ac power adaptor) out...
Page 22
6 limited warranty this item is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original date of purchase under normal household use. Within the warranty period, we will either repair or replace the product at our option. This warranty extends only...