Falcon TBM-18 Operating instructions manual - page 7
6
TECHNICAL SPECIFICATIONS
Transmitter
Receiver
Power Supply
(AC Power Adaptor)
Input: 110V AC
Output: 9V, 350 mA
Operating Temperature
32
° F (0° C) ~ 126° F (45° C)
Operating Environment
70
° F (25° C) ~ 112° F (40° C)
Channels Four
(4)
Receiver Sensitivity -- -90dBm
Channel Space
18 MHz
Frequency Stability
(
±) 250 KHz
(
±) 200 KHz
A/V Modulation Type
Frequency Modulation (FM)
Video Input Format
NTSC
--
Video Output Format
--
NTSC
Video Output Level
1Vp – p @ 75
Ω, > 38
dB
Net Weight
21.85 oz. (620g)
Dimensions
16.93 x 12.98 x 6.69 in (430x330x45mm)
NOTE: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IMPORTANT INFORMATION REQUIRED BY THE FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference; and (2) this device must
accept any interference received, including interference that may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio elevation
reception, which can be determined by turning the equipment off and on. The user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.