1. DL manuals
  2. Fält Communications AB
  3. Gateway
  4. 252236
  5. User Manual

Fält Communications AB 252236 User Manual

Manual is about: GSM Gateway

Summary of 252236

  • Page 1

    Art. No. 162236m v3.20a 2013-12-05 gsm gateway 252236 user manual content of delivery - gsm gateway, art no. 202236 - antenna sma, magnet foot, art no. 112322 - gsm gateway manual (this document), art no. 162236m - power adapter 230vac/12 vdc, art no. 132010 - modular cable, art no. 122033 - termina...

  • Page 2

    162236m user manual gsm gateway 2 table of contents 1. Installation ................................................................................................................................ 4 1.1 pin code ...........................................................................................

  • Page 3: Connections

    162236m user manual gsm gateway 3 connections insert the sim card, connect the antenna, autodialler ecii™ flex and power … gsm gateway sim autodialler flex in lift car tele phone ant power supply 12-24 vdc 230 vac or battery antenna sim pin code activated or deactivated pin code or activated set pin...

  • Page 4

    162236m user manual gsm gateway 4 1. Installation find a suitable place where to mount the gsm gateway following these guide lines: make sure the gsm coverage is good before the gsm gateway is mounted. Place the gateway near a window if possible. Make sure the leds on both sides are visible. Make su...

  • Page 5

    162236m user manual gsm gateway 5 2. Front panel connectors and indications usb phone p w r/ s t a t b a t t p ho ne 1 usb usb 2.0 mini connector to be used for connection with a pc. The usb can be used for updating the software of the gsm gateway and also for adjusting parameters, such as battery t...

  • Page 6

    162236m user manual gsm gateway 6 3. Back panel connectors and indications re s e t sim ant s2 g s m s1 12v dc ant sma connector for the antenna sim input of the sim card gsm status for the gsm connection when the gsm gateway is up and running (green led): gsm indicates off faulty gsm unit 800 ms on...

  • Page 7

    162236m user manual gsm gateway 7 4. Battery the b attery is supervised in two different ways. The first “low battery voltage indication” is activated when the battery voltage is too low for any reason. The second is a “battery fault alarm” activated when the battery capacity is too low and it is ti...

  • Page 8

    162236m user manual gsm gateway 8 5. Sms functionality note: the symbol means new line. 5.1 low battery voltage indication it is possible to generate an sms when a low battery voltage indication occurs; the functionality is activated by sending an sms to the gsm gateway. The sms must include the tel...

  • Page 9

    162236m user manual gsm gateway 9 sms to gsm gateway sms from gsm gateway the gsm gateway will acknowledge a correct programming by returning a sms as above. In this example when the power to the gateway is reestablished and the battery voltage is above the set voltage level the following sms from t...

  • Page 10

    162236m user manual gsm gateway 10 sms to gsm gateway sms from gsm gateway to reactivate the dial tone 2 (battery alarm/low battery voltage indication, dial tone); send the left side sms to the gsm gateway. The gateway will return the answer on the right side. Sms to gsm gateway sms from gsm gateway...

  • Page 11

    162236m user manual gsm gateway 11 lrr last restart reason xxx1 power on xx1x external reset x1xx watch-dog reset 1xxx low voltage reset op current operator in use, in text format cid cell id of the base station lac location area code of network cell line pots line on-hook or off-hook lhoff time sin...

  • Page 12

    162236m user manual gsm gateway 12 - click on “select file” - brows to find and select the new fw file supplied by fältcom or your local distributor. Note: the fw file always has the file extension bin (e.G. Gatewayfw.Bin). - click on “update”. During the update you can follow the progress in the st...

  • Page 13

    162236m user manual gsm gateway 13 6.2.1 led control on signal strength there are two led’s showing the strength of the gsm signal; s1 and s2. You can set the limits when to light these led’s. 6.2.2 battery control the gsm gateway can be used with or without battery backup. The default setting is ba...

  • Page 14

    162236m user manual gsm gateway 14 6.2.4 gsm sms access code change the sms access code. The sms access code is used an authorisation code to allow the gateway to send sms to the user. If the access code in the sms sent to the gateway is incorrect the gateway will not answer the sms. 6.2.5 gain cont...

  • Page 15

    162236m user manual gsm gateway 15 tone. The dial tone battery alarm is 1000ms on / 250ms off / 250ms on / 250ms off. To configure this setting set: “dial/congestion tone, battery fault” to “dial tone battery alarm”. This setting is default active. The emergency alarm must be programmed accordingly ...

  • Page 16

    162236m user manual gsm gateway 16 7. Technical data parameter: data: size (l x b x h): 165 x 140 x 25 mm weight: 558 g, with battery and antenna included protection class: ip 20 external power: 10-28 vdc power consumption at rest: 12v ongoing call: 12v battery type: nimh 4,8v 1250mah battery power ...