Fanaway EVO1 - PREVAIL Installation Instructions Manual - page 2
2
EVO1 - PREVAIL
INSTRUCTION MANUAL
NOTE: PLEASE READ THESE INSTRUCTIONS CAREFULLY
¾
The appliance is not intended for use by young children or infirm persons without
supervision.
¾
Young children should be supervised to ensure that they do not play with the
appliance.
SAFETY PRECAUTIONS
1.
THIS FAN MUST BE INSTALLED BY A LICENSED ELECTRICIAN
NOTE: INSTALLATION BY PERSONS OTHER THAN A LICENSED ELECTRICIAN
WILL VOID THE WARRANTY.
2.
The structure to which the fan is to be mounted must be capable of supporting a
weight of 45kg.
3.
The fan is designed for indoor use only. Mounting the fan in a situation where it is
subject to water or moisture is dangerous.
4.
The fan should be mounted so that the blades are at least 2.1 meters (7 feet) above
the floor.
5.
The fan and wall control can only be connected to a circuit, having a voltage of 240
volts A.C. The fan motor will draw up to 52 watts(does not include wattage used by
the 40 watt light kit)
BEFORE INSTALLATION
6.
Unpack the fan and carefully identify the parts. Please refer to FIGURE 3.
7.
Handle the unit assembly which includes motor, retraction mechanism, blades in
retracted position and light kit with care. Place the unit assembly on a cloth or a soft
surface to ensure that it is not scratched. It is recommended to wear cotton gloves
when installing the fan so that fingerprints are not left on the surface of the fan.
INSTALLATION
NOTE: ENSURE THAT THE POWER TO THE SUPPLY WIRES HAS BEEN TURNED
OFF BEFORE ATTEMPTING INSTALLATION.