Fanimation Treventi FP2500 Series Owner's Manual - page 4
4
Electrical and Structural Requirements
Ceiling
Ceiling
Joists
2˝ x 4˝
Outlet
Box
Figure 1
Your new ceiling fan will require a grounded electrical
supply line of 120 volts AC, 60 Hz, 15 amp circuit. The
outlet box must be securely anchored and capable of
withstanding a load of at least 50 lbs. Figure 1 depicts
different structural confi gurations that may be used for
mounting the outlet box.
If your fan is to replace an existing light fi xture, turn
electricity off at the main fuse box at this time and remove
the existing light fi xture.
Wiring and Control Options
Please choose one of the following options and proceed
to the page as indicated.
1. Fan & Light, 3-speed, reversable remote control
(C22), see page 8.
2. Fan & Light, 3-speed, reversable wall-mounted control
(C23), see page 9.
NOTE: If you are using a Fanimation Light Fixture with your fan, see Ceiling Fan Light Kit Installation Instructions (packed
with light kit) for wiring.
How to Assemble Your Motor Housing
Figure 2
1. Invert Housing, shown in Figure 2.
2. Align Captive Screws (located in Motor Adapter) with
the Housing screw adapters. (Figure 2)
Captive Screw
(4 places)
Motor Adapter
Housing
▲WARNING
To avoid fire or shock, follow all wiring instructions
carefully. Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
▲WARNING
Turning off wall switch is not sufficent. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and the
ceiling fan must be properly grounded as a precaution
against possible electrical shock.
▲WARNING
To reduce the risk of fire, electrical shock, or personal
injury, mount fan to outlet box marked acceptable for fan
support, and use screws supplied with outlet box. Most
outlet boxes commonly used for support of light fixtures
are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
INSTALLATION NOTE
Amalfi
®
Housing is shown throughout this manual as an
example. Proper care must be excersied when installing
the Woven Wicker, Bamboo, and Ceramic (pottery)
Housings.