Fantasia Medina Owner's Instruction Manual - page 15
15 of 20
Care and cleaning
Ensure that periodic checks of the fixings take place. (see Safety Precaution 11)
Periodic cleaning of your new Fantasia fan is recommended particularly the blades. The
plated or painted surfaces of your fan have been sealed with a lacquer to minimize any
discoloration or tarnishing. Therefore use a soft brush or lint free cloth to avoid
scratching the surface.
The motor has permanently sealed bearings so no lubrication is necessary
Do not use water when cleaning you fan as this could damage the surfaces of the casing
and the blades and may create the possibility of a electric shock.
Tips from Fantasia
If you have a false ceiling, connect the hanger bracket onto the main structure and use
an extension rod to lower the fan below the false ceiling. (Remember to allow adequate
clearance for the rotating blades – see Safety Precaution3).
The hanger bracket can be mounted onto a surface up to 40°. The fan will have to be
installed in the drop rod style of mounting for this (Remember to allow adequate
clearance for the rotating blades – see Safety Precaution 3).
Do not forget to put the canopy on the rod before connecting the rod onto the fan.
Extension chain is available if the control chains are not long enough, please ring the
help-line for further details.
If you are installing more than one fan make sure that you do not mix the fan
blade sets.
Fault Finding
Noise level unacceptable Noises from fans are usually due to something being loose on
the fan. As a first corrective measure ensure all screws are
tight (including shade screws if a light is fitted )
Fan wobbles excessively The blades may have imbalance. Follow the blades balancing
section.
The drop rod boss set screws may not be locked tightly.
Tighten and retry.
Fan will not rotate Check supply connections.
Check that the blades are not fowling anything
Light will not work Check supply connections.
Fan is tarnishing Check that no solvents have been used in the vicinity of the
fan – especially floor adhesives and brick acids.