Fantec MR-35HDC User Manual - page 11
8. Name and format the partition and click
.
9. Review the file system settings and click
to create the logical partition.
Important: Before reconfiguring a volume, back up your data and drag the old
drive to the trash to un-mount previously defined partition. If no hard drives are
connected to the Storage Appliance, the disk (8.0 GB Config Disk Media) will
appear. Do not remove or modify that partition. After you configure and partition
the new volumes, restore the backed-up data to the new configuration.
1. Launch
from the
>
folder.
Next
Finish
Mac OS X
Disk Utility
Application
Utilities
2. Select a configured disk and click the Partition tab. This procedure illustrates
the
Storage Policy configuration, which concatenates the capacity of all hard
drives connected to the unit.
BIG
3. Select 1
from the
drop-down list.
4. Enter a name for the volume in the
field (such as “My BIG disk”.)
Partition
Volume Scheme
Name
13
2.1.5 Partitioning Volumes
Partition a Volume
MS Windows
Important
Not
Initialized
My Computer
Manage
This section explains how to partition volumes after configuring them in the GUI.
You must partition volumes for the host computer's operating system before you
can store data on the volumes. Refer to the operating system's documentation for
further guidance.
: Before reconfiguring a volume, back up your data and delete
previously defined partitions. If no hard disk drives are connected to the
SteelVine Storage Processor, the SteelVine Processor device (the "
" disk with no capacity allocated to it) will appear. Do not initialize or
modify that device.
1. Right-click the
icon on your desktop and select
from the
pop-up window.
2. Select
under
to open the Windows Disk Manager.
Disk Management
Storage
10