Fantech AEV 1000 Nstallation, Operation And Maintenance Manual - Maintenance
MAINTENANCE
The filter needs to be checked
and cleaned every three months
or when it appears dirty.
To
clean, remove the filter and vac-
uum. If the filter still appears
dirty, it can be washed in warm
sudsy water (mild detergent).
Replace the filter if it becomes
too soft after washing. The filter
should be replaced yearly or
when it can no longer be
cleaned properly. You may have
to change the synthetic filter
after washing a few times.
PRACTICAL
TIPS
• To prevent electrical shock,
check that the unit is
unplugged before doing any
repairs or maintenance.
•
A yearly inspection is
recommended to ensure the
efficiency and trouble-free
use of your system. Run
through the system
and verify the different
operating modes.
FILTER
The motor - The motor
are factory balanced and
lubricated for life.
They
require no maintenance.
The unit - The inside of
the unit should be vacu-
umed yearly. Be careful not
to damage any of the
mechanical components
and electrical connections.
Outside hoods - The out-
side hoods need to be
checked every season to
make sure there are no
leaves or insects blocking
the airflow. Check regular-
ly that there are no pollu-
tants near the intake hood.
Make sure they are clear of
any snow accumulation
during the winter months.
CAUTION
MAKE SURE UNIT IS UNPLUGGED BEFORE ATTEMPTING ANY MAINTENANCE WORK
The following components should also be inspected regularly and well maintained.
NOTE: Some products may not be exactly as illustrated in Installation, Operation and Maintenance manual.
OUTSIDE HOODS
The outside hoods need to be
checked every season to make
sure there are no leaves or
insects blocking the airflow.
Check regularly that there are
no pollutants near the intake
hood. Make sure they are clear
of any snow accumulation
during the winter months.
11
Fan Tech at
kitchen
::
accessories
U N L I M I T E D
Call 1-800-667-8721 anywhere in the US and Canada -
www.kitchensource.com