Fantech AEV 1000 Nstallation, Operation And Maintenance Manual - Operation
Air Quality Sensor
The wall mount Air Quality Sensor (AQS) monitors indoor
air quality and activates the override mode when carbon
monoxide, formaldehyde, benzene, volatile organic
compounds and other pollutants are detected. The unit will
then return to normal mode once the air pollutants are
reduced to a pre-determined lower level.
Three low voltage wires are required for operation with
transformer
* This control is not a warning device.
Dehumidistat I
The wall mount dehumidistat monitors the humidity level in
the area it is installed.When the humidity level rises above the
desired set-point, the AEV will activate to high speed/override
mode. Once the humidity level returns to desired condition,
the unit will return to the normal mode.
2 low voltage wires required for operation.
To avoid window
condensation:
• It is not necessary to change
the humidity control every
day. Monitor the average
weekly temperature or
experiment with various
settings until you find a level
that is comfortable for you.
Adjust the control when
needed.
PRACTICAL
TIPS
OPERATION
(CON’T)
* All controls are low voltage. 18 to 24 gauge wire is recommended.
OPTIONAL REMOTE CONTROLS
3
Fan Tech at
kitchen
::
accessories
U N L I M I T E D
Call 1-800-667-8721 anywhere in the US and Canada -
www.kitchensource.com