Fantom Drives Titanium Owner's Manual - Hardware Installation
Hardware Installation
• Plug the included power cable into the power connector on your drive and plug the
other end into a grounded electrical outlet.
• Press the power switch to turn on your Fantom Drives storage device, then power-on
your computer.
• Connect one end of the included 6-pin IEEE-1394 peripheral cable to one of the
FireWire ports on the rear of your drive.
• Connect the other end to one of your computer’s FireWire ports, or to the FireWire
port on a device already connected to your computer.
FireWire
USB
• Connect the power cable to your USB Hard Disk Drive and plug it into a grounded outlet.
• Press the power switch to turn on your Fantom Drives FireWire/USB 2.0 Storage Device.
• Connect the square end of the included peripheral cable to the USB port on the rear
of your Fantom Drives USB Storage Device.
• Connect the rectangular end of the cable to a free USB port on your PC or USB hub.
Specifications- Hard Disk Drives
Note: in order to reach USB 2.0 speeds, you must have a computer or
host adapter that has USB 2.0 support. Your Fantom Drives storage
device will autosense the highest available connection speed.
External Hard Disk Drive Models
Capacities............................................... 80,120, 160, 180, 200, 250GB
Buffer Size............................................... >2MB
Track to Track......:.................................... 0.8
Full Stroke................................................ 17
Data Transfer Rate..................................... 30-38MB/s
Sector Size............................................... 512 bytes
Latency..................................................... <4.17 ms
Seek time (average)................................... <8.5 ms
Internal Drive Interface............................... ATA 133
Cable Transfer Rate.................................... 400Mb/s (FireWire)
480Mb/s (USB 2.0)
Rotational Speed....................................... 7200RPM
Dimensions............................................... 5.3”x8.8”x1.5”
Weight..................................................... 2.4 lbs
Power Supply............................................ 110-240 Volts Auto Switching
IMPORTANT: if your drive is delivered under hot or cold conditions,
please allow the drive to reach room temperature before operating to
prevent damage.
6