Fargo C50 Configuration Manual - page 46
ToolBox
Page 5-8
PLT-01277, Version: 1.2
June 2014
Ribbon Print
Tension
Adjusts the tension (drag)
on the ribbon during
printing.
Increase the value to increase tension. To
decrease tension, decrease the value.
Note:
Small adjustments are recommended. Too
high or too low tension can cause the ribbon to
break.
Ribbon Calibrate
Green
Reserved
Reserved
Resin Heat Adjust
Adjusts the darkness of
black resin text and bar
codes if they appear
faded or too light or dark.
Increase the value to darken the print. Decrease
the value to lighten the print.
Sleep Time
Adjusts the time until the
printer stops energizing
the transfer roller, which
conserves energy.
Increase the setting to delay the sleep mode.
Disable sleep mode with a 0 value.
The counter for this setting starts after standby
time has elapsed.
OLED Contrast
Reserved
Reserved
Ribbon Calibrate
Blue
Reserved
Reserved
Cleaning Rate
Adjusts the number of
cards printed before the
printer displays a message
to indicate cleaning is
needed.
The default value is 3000. To increase the
frequency of cleaning, lower the value.
Note:
The card count on the Printer Info tab
does not reset when cleaning completes.
Ribbon Green
LED Level
Reserved
Reserved
Ribbon Blue LED
Level
Reserved
Reserved
Head Home
Offset
Reserved
Reserved
Head Print Offset
Reserved
Reserved
Head Contact
Offset
Reserved
Reserved
Head Queue
Offset
Reserved
Reserved
Head Card
Thickness Offset
Reserved
Reserved
10 Mil Card
Queue Offset
Reserved
Reserved
Setting
Description
Troubleshooting