Fargo C50 Configuration Manual - page 9

June 2014

PLT-01277, Version: 1.2

Page 1-3

Specifications

1.2

Document Conventions

Symbols

Th

e following symbols are used in this document:

1.3

Safety Messages

1.3.1

Safety Messages - United States

General Warning:

This symbol indicates the requirement to read the manual carefully or the necessity 

of an important maneuver or maintenance operation.

Electricity Warning:

This symbol indicates dangerous voltage associated with the laser, or powerful 

enough to constitute an electrical risk. This symbol may also appear on the 

machine at the risk area.

Symbol

Critical Instructions for Safety Purposes

Danger:

Failure to follow these guidelines results in personal injury or death. 

To prevent personal injury or death:

• Reference the following safety messages before performing an operation. 

• Always remove the power cord prior to performing repair procedures, unless otherwise 

specified. 

• Ensure only qualified personnel perform these procedures.

ESD:

This device is electro statically sensitive. You may damage the device if exposing it to 

static electricity discharges. 

To prevent damage:

• Reference the following safety messages before performing an operation.

• Observe all established Electrostatic Discharge (ESD) procedures while handling cables in 

or near the Circuit Board and Printhead Assemblies. 

• Always wear an appropriate personal grounding device.

• Always remove the Ribbon and Cards from the Printer before making any repairs, unless 

otherwise specified. 

• Remove jewelry and thoroughly clean hands before working on the Printer.

Caution:

This symbol warns of an electrical hazard that could result in personal injury or death.