Summary of wile 55
Page 1
Moisture meter en operating instructions.
Page 3: Contents
Contents wile 55 - operating instructions........................................4 1. Box contents................................................................................4 2. Usage...........................................................................................4 2.1. Preparation fo...
Page 4: 1. Box Contents
En wile 55 - operating instructions 1. Box contents - wile 55- moisture meter - carrying case - carrying strap - operating instructions - 9 v 6f22 battery (installed). 2. Usage 2.1. Preparation for the measurement important: the scales of wile- moisture meter are developed to measure the quality of ...
Page 5
En samples. - when taking the sample directly from the dryer wait until the temperature compensation is done or pre-warm the measuring cup with warm grain. - remember that the moisture inside the load in the grain dryer varies until the final stage of the drying process. 2.3. Filling the measuring c...
Page 6: Display, For Example -1-.
En number of the selected scale (grain) will appear on the display. After that the meter will automatically calculate the measurement and in a moment the result of the measurement (moisture content) will be displayed. The meter automatically compensates the temperature difference between grain and t...
Page 7: 2.7. Checking The Scale
En of scales can be found on the side sticker of the meter. Choose from the list, the appropriate scale for your grain. There is an additional -0- scale in the meter. -0- scale is used by wile service department to calibrate the meters. -0- scale is a basic scale which can also be used together with...
Page 8: 3. Processing The Result
En 3. Processing the result 3.1. Automatic average calculation the meter can calculate the average value of several measurements. After you have made a measurement, the result can be saved for the average calculation. 3.2. Saving the measurement result for the average calculation make the measuremen...
Page 9: Press On The P- Button.
En press on the p- button. When you see a on the display, release the f- button. If the average value appears on the display, you can erase the average by pressing and holding the f- button. The memory is erased, when 0 and then a00 appear on the display. Note! Always remember to erase the average m...
Page 10: 3.7. Exceptional Result
En display. Wait for a moment and the result appears on the display again. Now each time you press the f- button, 0,1 moisture % will be deducted from the result. Note! This adjustment is specific to the used scale. In other words there may be defined specific adjustment for each scale. 3.5. Display...
Page 11: 4. Grain Properties
En measurement range, you will see hi on the display. If the measurement result falls below the lower limit of the measurement range, you will see lo on the display. The measurement range for grain and seeds is approx 8-35% and for oil seeds 5-25%. If you get hi or lo as a measurement result check i...
Page 12
En lobat-text in the upper left part of the display. If the battery is almost empty, the display will show some random marks and lobat- text can fade. The battery cover is situated on the bottom of the meter. Open the cover by pushing the locking lever over the battery symbol and replace the battery...
Page 13: Partners.
En method of moisture content definition is based on the technical specification: grain iso 712, oil seeds iso 665 and corn iso 6540. Our method to sample the grain is based on iso 950 standard and while handling the samples we follow iso 7700/1 and iso 7700/2 standards (iso = international organiza...
Page 14
En ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________...
Page 15: Declaration Of Conformity
Declaration of conformity according to iso/iec guide 22 and en 45014 manufacturer’s name: farmcomp oy and address: jusslansuora 8 fin-04360 tuusula finland declares, that the product product name: moisture tester model numbers: wile 55 conforms to the emc directive 2004/108/ec by following the harmo...
Page 16: Farmcomp Oy
Copyright farmcomp oy 2010, all rights reserved farmcomp oy tel. +358 9 7744 970 jusslansuora 8 fax +358 9 7744 9744 fi-04360 info@farmcomp.Fi tuusula http://www.Wile.Fi finland 98208226.