Farmcomp wile 55 Operating Instructions Manual - 3. Processing The Result
EN
3. Processing the result
3.1. Automatic average calculation
The meter can calculate the average value of several
measurements. After you have made a measurement, the result can
be saved for the average calculation.
3.2. Saving the measurement result for the average calculation
Make the measurement as usual. When the result is displayed,
press once the F- button. A will appear on the display and the meter
will add the measurement result for the average calculation.
The average calculation is ready when two numbers, for example
A05 and 13,8 appear alternating on the display.
The values used in the example mean:
- A05 - the number of measurement results included into the
average value is 5
- 13,8 - the average value of those 5 measurements.
If you do not want to include the measurement result into the
average calculation, don't do anything after the measurement, just
wait until the meter automatically turns off it is then ready for the
next measurement.
Before calculating the average value of every new load of
material, make sure that average calculation memory is empty
and erase it if required.
3.3. Erasing the average calculation memory
Press and hold the F- button. Switch on the meter with a single
8