Farnell LCD-5014KL User manual - page 6
English
English
PRESET
AUTO SEARCH
SEARCH
FINE TUNE
BAND
UHF
PROGRAM
-
SKIP
OFF
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
AUTO SEARCH: the original set is auto search, press [V+] or [V-] to make it auto search. It
would Search all the currently TV channels and store them.
SEARCH: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to proceed to
search channels by hand. It would search one channel and store it.
FINE TUNE: press [CH-] or [CH-] to choose this item, then press [V+] or [V-], you can adjust
the program conditions while you are watching by hand.
BAND: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to choose the
band, the band formats which you can choose have: VHF-L, VHF-H, UHF.
PROGRAM: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to add or re-
duce the Channel, the total channels for your selection are from 0 to 255.
SKIP: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to clear the current
channel.
6) Clock-set function
Press the [MENU] button for six times continuously, you shall find the clock-set
function menu. Press [CH+] or [CH-] to choose the item which you request, then
press [V+] or [V-] to switchover the item.
The original set is 0. Press [V +] or [V-] to add the sleeping time, it will
add 10 minutes when you press one time, the max sleeping time is 240 minutes.
CLOCK: press [CH+] or [CH-] to choose this item, the original condition is as below:
CLOCK
SLEEP
0
TIME
-:-
OFF TIME
-:-
ON TIME
--:--
ALARM
--: -
B.TIME
-:-
B.PR
-
7
8
Press [V+] or [V-] to zero, press [V+] to add one minute, the max can be 59 minutes, then
press the button once more, it come back to zero. Press [V-] to add one hour, the max can
be 23 hours, then press the button once more, it comes back to original condition.
NOTE: the clock will come back to original condition when the Power plug is taken out
from the socket.
OFF TIME: press [CH+] or [CH-] to find the original condition of this item, then press [V+]
or [V-] to make it to zero, press [V+] to add one minute, the max can be 59 minutes, then
press the button once more, it come back to zero. Press [V-] to add one hour, the max can
be 23 hours, then press the button once more, it comes back to original condition.
The unit will switch off automatically when the closing time arrives.
NOTE: the clock will come back to original condition when the Power plug is taken out
from the socket.
ON TIME: press [CH-] to find the original condition of this item, then press [V+] or [V-] to
make it to zero, press [V+] to add one minute, the max can be 59 minutes, then press the
button, once more, it comes back to zero. Press [V-] to add one hour, the max can be 23
hours, then press the button once more, it come back to origiinal condition. The unit will
switch on automatically when the ON time comes.
NOTE: the clock will come back to original condition when the Power plug is taken out
from the socket.
ALARM: press [CH-] to find the original condition of this item, then press [V+) or [V-] to
make it to zero, press [V+] to add one minute, the max can be 59 minutes, then press the
button once more, it come back to zero. Press [V-] to add one hour, the max can be 23
hours, then press the button once more, it comes back to original condition. On the
display will appear ALARM when the alam time comes.
B. TIME: press [CH+] to find the original condition of this item, then press [V+] or [V-] to
make it to zero, Press [V+] to add one minute, the max, can be 59 minutes, then press the
button once more, it come back to zero. Press [V-] to add one hour, the maximum hour
can be 23 hour, then press the button once more, it comes back to original condition. The
unit will switch on at the time when the booking time comes, showing the channel
selected with B.PR.
B.PR: press [V+] or [V-] to add or reduce the booking channel number, you can choose
from 0 to 255.
7) AV operation
When you change TV system to AV system, Pre-set function and S.SYS, SWAP, COPY,
WEAK SIGNAL, PRESET will not be displayed on the screen.