Farnell LCD-5014KL User manual - page 8
English
English
TROUBLE-SHOOTING
SYMPTOMS AND POSSIBLE CAUSES
A) No picture, No sound
- Check Power cord connection
- Switch Power to ON
B) Good picture, No sound
- Press Volume + button
- Check if Mute function is inserted . In case press Mute button again
C) No picture, Good sound
- Adjust brightness control
D) No colour
- Adjust the colour control
-Check the Tuning with FINE Tuning
E) Snowy picture, Noisy sound
- Check and move the antenna
F) Dotted line or stripes
- This may be caused by local interference (e.g. cars, neon signs, hair dryers, etc)
Adjust the antenna for minimum interference
G) Double images or ‘Ghosts’
- This may be caused by reflections from nearby mountains or buildings.
H) Remote control malfunction or reduction in operating distance
- Check battery terminals or replace batteries
- Clean indicator window (remote sensor) (9)
SPECIFICATIONS
SCREEN TYPE
LCD-TFT
SCREEN SIZE
12.7 CM (5")
TELEVISION SYSTEM
PAL B/G-I, SECAM BG-DK-L
RECEIVABLE FREQUENCIES
VHF-1 CH2-CH4, VHF-3 CH5- CH12,
UHF CH21-CH69
HYPERBAND
S1 - S41
MEMORIES
255
VIDEO IN
1Vp-p (75 Ohm)
AUDIO IN
100-300 MV (RMS)
DISPLAY RESOLUTION
960(H) X 234(V) dots
ACTIVE AREA
110.2(H) X 84(V) mm
AUDIO OUTPUT
0.5W (MAX)
POWER SUPPLY
DC 11V-15V (1A)
POWER CONSUMPTION
6 W
DIMENSION
155(L) X 125(H) X 30(D)
WEIGHT
420 g (without batteries)
Due to continuing improvements, the features and design are subject to change without
notice.
11
12