FARONICS POWER SAVE Manual - page 22

Faronics Power Save User Guide

  22

|

  Installing Power Save

Installing or Upgrading Power Save on a Workstation via Core 

Console

Power Save can be deployed by Installing or Upgrading Power Save via the Core Console. 

The Core Agent, which is part of Faronics Core, must be installed on each workstation that will be 

managed by Power Save. For more information on installing the Workstation Agent Installer, 

refer to the Faronics Core user guide. The latest user guide is available at 

http://www.faronics.com/library

.

Once the Core Agent is installed, the workstations are detected on the network and visible in Core 

Console. You can now Install or Upgrade Power Save on the workstations.

To install or upgrade Power Save, select a single workstation or multiple workstations, click 

Configure Workstations in the right pane and select Advanced > Install/Upgrade Power Save 

Client. 

The workstation reboots after a successful install or upgrade.

If there is more than one Loadin installed, the right-click contextual menu for 

Power Save can be accessed by right-clicking a workstation, selecting Power Save 

and then selecting the particular action.