FARONICS POWER SAVE Manual - page 48
Faronics Power Save User Guide
48
|
Configuring Power Save
Energy Consumption Profile
An Energy Consumption Profile is a customized set of values to specify power consumption of
Monitors and Computers running in full capacity and on standby mode, and cost of per kilowatt
hour.
This data is used in the Power Save report, and quantifies how much power and money is being
saved by your hardware. The default Energy Consumption Profile is Default.
Complete the following steps to create a new Energy Consumption Profile:
1. Right-click Core Console in the Console Tree Pane and select Properties.
2. The Core Console Properties dialog is displayed. Click the Power Save tab. Click Energy
Consumption Profile.
3. Click New to create a new Energy Consumption Profile.
4. Specify a unique name in the Name field.
5. Specify the power consumption for Monitors in the Watts-on and Watts-standby.
6. Specify the power consumption for Computers in the Watts-on and Watts-standby.
7. Specify the cost in the Cost field in cents per kilo watt hour.
Alternatively, to Create or Apply an Energy Consumption Profile through the right-click
contextual menu:
•
To create a new Energy Consumption Profile, select one or more workstations, right-click and
select Energy Consumption Profile> Create New. Follow steps 2 to 5 above.
•
To apply a previously created Energy Consumption Profile, select one or more workstations,
right-click and select Energy Consumption Profile> Apply Profile. Select the Energy
Consumption Profile and click Apply or OK.