Fell WiMEA Owner's Manual - page 6
Waterproof 1 meter
UV protective materials
IP 67 Certified
Waterproof 3 meter
UV protective materials
IP 68 Certified
Press and Hold to Pair
Pair any WiMEA MOB Unit to any WiMEA Boat Unit. Your Boat Unit
remembers all MOB Units historically paired. Family or friends can
have their own MOB Unit for the same boat with a WiMEA Boat Unit
installed. The MOB Unit connects to the latest paired Boat Unit using
ID technology.
One click – Connect / Disconnect System
After your MOB Unit and Boat Unit is paired for the first time, click
your MOB Unit once when entering the boat to start
driving – you are free to move whilst being safe. When disembarking
the boat – click the MOB Unit once more to disconnect.
MOB situation and Direct Restart System
FELL WiMEA8
®
Protocol automatically triggers MOB Mode (Man
Overboard Mode) when the MOB Unit goes into the water or travels
out of range from the connected Boat Unit. 6 seconds after stopping
the engine the Override Mode is engaged and automatically switches
the signal relay to the engine back on. This allows any passengers on
board to quickly restart the engine and pick up the missing driver in
the water, without needing to interact with the Boat Unit.
MOOR Mode System
In the event you as the driver needs to exit the boat while mooring or
performing other needs, you can engage MOOR Mode. Simply Press
& Hold your MOB Unit for 3 seconds while being connected, the FELL
WiMEA will be in standby for 2 minutes, allowing you to go out of
wireless range without the engine being stopped. After 2 minutes the
system will automatically reconnect if you are within range from your
Boat Unit.
10
11