Advanced owner's manual.
Bronco ™ 40 advanced manual introduction this manual is your step-by-step guide to all the advanced features found on your bronco™ 40 amplifier. For information on using fender® fuse™, ableton® live or amplitube®, please see the separate manuals for each product available at www. Fender.Com/support ...
Bronco ™ 40 the leds are numbered 1, 2, 3 and correspond to three posi- tions within each of the 4 selection ranges on each knob. Use the leds to determine exactly which position the knob is pointing to, for example, a1, a2 or a3 (a1 is shown below). Off off a d b c ultra med high low 1 2 3 comp act...
Bronco ™ 40 tuner button your bronco™ 40 amplifier has a built-in tuner mode that turns the control panel leds into a chromatic bass tuner. To use the tuner: 1. Press and hold the tap button for 2 seconds. The tap and exit buttons will illuminate. 2. Strike any single string on your bass and watch t...
Bronco ™ 40 footswitch connect a (optional) 1-button footswitch (p/n 0994049000) into the ftsw jack to enable remote selection of your two favorite presets. The led (next to the ftsw jack) will turn red or green to indicate which footswitch preset is active. To program the footswitch: 1. Select a pr...
This product is covered by one or more of the following patents: us pat. 6,222,110 amplificadordeaudio importado por: instrumentos musicales fender s.A. De c.V., calle huerta # 132, col. Carlos pacheco, c.P. 228890, ensenada, baja california, mexico. Rfc: imf870506r5a hecho en china. Servicio de cli...
